Worn out over the years, discolored by the sun and bad weather, your garden furniture looks gray? Before replacing it, try to repaint it. Here are some tips to give it a second lease of life with a few brushstrokes.
Under stress, the garden furniture tends to wash out over time. But rather than part with it, give it a good facelift! Today there is a wide range of paints that can be used to renovate and revamp almost any surface. Most of them without an undercoat, they are designed to last over time and offer more and more extensive color palettes.
Which paint to choose?
If you want to keep the raw appearance of the wood, choose a matt or glossy varnish, colorless or slightly stained. If you want to color, choose a colored stain or, more coverage, special wood paint. Another option: paints for floors. Designed to resist trampling, but also to extreme climatic conditions, they will be able to withstand UV and repeated friction inflicted on garden chairs.
Teak garden furniture, watch out! It is difficult to paint oiled surfaces, even after sanding, as the material will have difficulty adhering. If your garden furniture is made of teak or exotic wood, therefore greasy, prefer a protective oil to protect and revive the wood.
Our selection: Special wood paint for extreme climates, V33; Elastop and Toll’Azur painting, Tollens; Stain Xpro3, Ripolin; Teak oil, Bondex.
Not all paints offer optimal results on a material such as plastic. However, there are ranges specially designed for this type of surface, and designed to resist UV and bad weather. The Julien brand is the reference here and offers a range of 11 colors, from the most classic to the most vitamin.
For wrought iron garden furniture
Choose a special ferrous metal paint here. Designed to resist rust, it can be applied without an undercoat. On the color side, the palette is becoming wider, from traditional black, white, and steel gray, through different shades of green, blue, or red.
Wrought iron tends to tarnish and rust when not properly maintained. This is all the more so when it comes to garden furniture subject to external elements and bad weather. Here are some tips for preserving your wrought iron over time.
Like PVC, the resin is not a material that lends itself well with all painting work. Special plastic paint will nevertheless give it a little facelift. With an undercoat of acrylic primer, you can also use a conventional paint designed for outdoors.
Painting your garden furniture: the steps
Clean. For the material to stick, the support must be as clean and smooth as possible. Start by dusting and pass your garden furniture to acetone to degrease it well.
Sand. Wood, resin, or PVC, lightly sand with sandpaper for better adhesion of the product. If your furniture is made of wrought iron, scrape the surface using a small wire brush to remove chipped paint and any traces of rust.
Treat wooden furniture. The paint will resist better healthy support. To best protect your wooden furniture, especially if it stays outside all year round, it is best to apply a protective treatment (anti-foam, anti-fungus, etc.). In this case, allow a week of drying before painting.
To paint. Varnish or paint: always apply two coats, respecting the drying time between each. Then count at least 48 hours, the time the paint dries to heart before you can enjoy your garden furniture again.
You may like to read- http://www.lsdaynursery.com/